Standard DTF Transfer production takes 2-3 business days.

Artwork line thickness should be at least 0.02 in. (0.5mm) or thicker. Any part of the artwork thinner than this will likely NOT print or transfer to the garment.

You can check your design by making a 0.02 inch circle and moving it over your artwork. If the circle overlaps elements of your design, then they are too thin.

Transfers are printed in CMYK not RGB. The colors on your screen are not an accurate representation of how artwork will print.

DTF Transfers will only print with a white background if the design file is setup and saved that way.

These transfers easily heat apply to cotton, polyester, poly/cotton blends, and tri-blends at 300° for 12-15 seconds at Medium #5 pressure. Peel hot or cold. Optional: cover and seal an additional 5 seconds for a matte finish and superior hand.

DTF Transfers can also apply to Nylon and Spandex, but results may vary so testing is recommended.

Opening soon